Hydraulic press operation process

First, preheating

First of all, turn on the power and start the hydraulic press, and start to warm up after the machine enters the normal working state. The preheating time is generally about 20 minutes to ensure that the equipment temperature reaches the appropriate processing temperature.

Second, the workpiece clamping

The workpiece needs to be clamped before entering the hydraulic press. The operator should choose the appropriate clamping method according to the characteristics and dimensions of the workpiece. During the clamping process, it is necessary to pay attention to the stability of the workpiece to ensure that there will be no displacement or damage.

Third, adjust the oil pressure

Begin to adjust the oil line pressure, which is a key part of ensuring work efficiency and processing quality. The operator can make corresponding adjustments according to the nature of the workpiece and the pressure indicator of the equipment. In general, adjusting too high oil pressure may cause damage to the workpiece, and adjusting too low will affect the processing efficiency.

4. Start processing

After all the preparatory work is completed, the production can begin. In the processing process, the operator should pay attention to the operation of the equipment, regularly check the oil pressure and processing effect. If any abnormality or fault is found, stop the operation immediately and rectify the fault.

5. Safety precautions

1. The operator should be trained and authorized, and familiar with the equipment operation procedures and safe operation methods.

2. The operator should wear safety equipment such as protective hats, goggles, and gloves to minimize risks and injuries.

3. During the operation, the operator should avoid leaving the equipment or using too much force to push the workpiece, so as not to cause equipment damage or accidents.

4. After the machine processing is completed, the operator should clean and maintain the machine to ensure the normal operation and long-term use of the equipment.

The above is a brief introduction to the operating process of the hydraulic press. Operators should follow relevant procedures and safety measures to ensure production safety and processing efficiency.

Four column hot press